请教simpleFoam计算时smoothsolver无后续的问题

[纪阳]

各位老师好，我是一名openfoam新手，我在练习用openfoam做离心泵的定常仿真的时候，使用simpleFoam求解的时候，出现了在第一个迭代步时候，出现了smoothsolver之后没有了后续的问题，实在没有找到问题出现在哪里，请老师们指点。
我先贴出计算时候的日志文件，其他设置如果有老师怀疑有问题我逐步贴出。

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     | Website:  https://openfoam.org
    \\  /    A nd           | Version:  9
     \\/     M anipulation  |
\*---------------------------------------------------------------------------*/
Build  : 9-c96968adf6d8
Exec   : simpleFoam
Date   : Aug 17 2022
Time   : 11:05:28
Host   : "Richard-CheerPC"
PID    : 289
I/O    : uncollated
Case   : /mnt/c/Users/fang1/desktop/centrifugalpump/total
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


SIMPLE: Convergence criteria found
        p: tolerance 1e-05
        U: tolerance 1e-05
        "(k|epsilon)": tolerance 1e-05

Reading field p

AMI: Creating addressing and weights between 2046 source faces and 3460 target faces
AMI: Patch source sum(weights) min/max/average = 0.999949, 1.00011, 1.00002
AMI: Patch target sum(weights) min/max/average = 0, 1.00011, 0.223431
AMI: Creating addressing and weights between 1394 source faces and 454 target faces
AMI: Patch source sum(weights) min/max/average = 0.92988, 1, 0.997976
AMI: Patch target sum(weights) min/max/average = 0.999064, 1, 0.999942
Reading field U

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting turbulence model type RAS
Selecting RAS turbulence model kEpsilon
bounding k, min: 0 max: 0.018 average: 0.018
bounding epsilon, min: 0 max: 0.00318 average: 0.00318
RAS
{
    model           kEpsilon;
    turbulence      on;
    printCoeffs     on;
    Cmu             0.09;
    C1              1.44;
    C2              1.92;
    C3              0;
    sigmak          1;
    sigmaEps        1.3;
}

Creating MRF zone list from MRFProperties
    creating MRF zone: MRF1
No fvModels present
No fvConstraints present

Starting time loop

Time = 1

smoothSolver:  Solving for Ux, Initial residual = 1, Final residual = 0.0432213, No Iterations 3
smoothSolver:  Solving for Uy, Initial residual = 1, Final residual = 0.0431271, No Iterations 3
smoothSolver:  Solving for Uz, Initial residual = 1, Final residual = 0.0825791, No Iterations 2

[李东岳]

log后面就啥都没有了直接停了？

[纪阳]

@李东岳 对，是的，后面就什么都没有就停了，这就让我都不知道问题出在哪里。

[李东岳]

@纪阳 太奇葩了 你这个是win子系统么

[纪阳]

@李东岳 是的，系统是win10 19043.1889 wsl2 ubuntu 22.04LTS

[李东岳]

@纪阳 把你的算例发上来，我给你泡一下试试。清空一下算例，把文件做小。

[纪阳]

@李东岳 好的，十分感谢老师。因为没找到论坛上传附件功能的位置，就冒昧上传到百度云，麻烦您了。
https://pan.baidu.com/s/1W1zcc4_9W2LAWPF2X4RhxA?pwd=ibst

[李东岳]

你这个跑发散了。检查一下你的设置。
另外，才发现WSL竟然不输出错误信息， @bestucan 大佬，WSL那面不输出错误信息么

[纪阳]

@李东岳 好的，谢谢老师，有错误信息就好办，看来还是得转战linux