new cannot satisfy memory request

[hongjiewang]

运行算例的时候，出现了这样的错误。

new cannot satisfy memory request.
This does not necessarily mean you have run out of virtual memory.
It could be due to a stack violation caused by e.g. bad use of pointers or an out of date shared library

通过Info输出，判断是mixture这个指针出现了问题，求解器中关于mixture的定义如下：

    Info<< "reading mixtureFluid\n" << endl;
    mixtureFluid.set
    (
       i,  
       temperaturePhaseChangeTwoPhaseMixture::New
       (
          thermoFluid[i],
          fluidRegions[i]
       ).ptr()  
    );

 temperaturePhaseChangeTwoPhaseMixture& mixture = mixtureFluid[i];

先是重新编译了涉及到的库和求解器；
也更换了工作站进行运行;
网格数有59万，也不是网格太多内存不够的问题。
还是出现同样的错误，请问我应该怎么修改~谢谢大家

[李东岳]

i的数量有没有溢出？

[hongjiewang]

@李东岳
感谢东岳老师回复，我检查的时候发现网格出现了错误。
我是从ICEM画好网格导入进来的，第一步fluentMesh3DToFoam后checkMesh是没有错的；

Checking basic cellZone addressing...
    CellZone            Cells        Points       Volume       BoundingBox
    FLUID               1347108      1388240      1.11022e-09  (-5.19735e-11 -7.56339e-18 -5.51343e-11) (0.001 0.001167 0.001)
    SOLID               429128       450800       2.2278e-10   (-5.19735e-11 0.001 -5.51343e-11) (0.001 0.001333 0.001)

Checking geometry...
    Overall domain bounding box (-5.19735e-11 -7.56339e-18 -5.51343e-11) (0.001 0.001333 0.001)
    Mesh has 3 geometric (non-empty/wedge) directions (1 1 1)
    Mesh has 3 solution (non-empty) directions (1 1 1)
    Boundary openness (2.20986e-15 -2.97635e-15 6.02407e-17) OK.
    Max cell openness = 3.08974e-16 OK.
    Max aspect ratio = 20.3769 OK.
    Minimum face area = 1e-12. Maximum face area = 3.46597e-10.  Face area magnitudes OK.
    Min volume = 1.26582e-17. Max volume = 4.3873e-15.  Total volume = 1.333e-09.  Cell volumes OK.
    Mesh non-orthogonality Max: 0.00311489 average: 4.38178e-05
    Non-orthogonality check OK.
    Face pyramids OK.
    Max skewness = 0.000137648 OK.
    Coupled point location match (average 0) OK.

Mesh OK.

End

在我把流体域和固体域分开之后，splitMeshRegions -cellZonesOnly -overwrite，再次checkMesh就会有不垂直的边导致报错

Checking patch topology for multiply connected surfaces...
    Patch               Faces    Points   Surface topology                  
    HEAT                11534    11760    ok (non-closed singly connected)  
    FRONTANDBACK        44968    45570    ok (non-closed singly connected)  
    SYMMETRY            24332    24800    ok (non-closed singly connected)  
    BOTTOM              11534    11760    ok (non-closed singly connected)  

Checking faceZone topology for multiply connected surfaces...
    FaceZone            Faces    Points   Surface topology                  
    int_FLUID           4000572  1388228  multiply connected (shared edge)  
    int_SOLID           1265994  450788   multiply connected (shared edge)  
    INTERFACE           15958    16240    ok (non-closed singly connected)  
  <<Writing 1820730 conflicting points to set nonManifoldPoints

Checking basic cellZone addressing...
    CellZone            Cells        Points       Volume       BoundingBox
    FLUID               1347108      1388240      1.11022e-09  (-5.19735e-11 -7.56339e-18 -5.51343e-11) (0.001 0.001167 0.001)
    SOLID               429128       450800       2.2278e-10   (-5.19735e-11 0.001 -5.51343e-11) (0.001 0.001333 0.001)

Checking geometry...
    Overall domain bounding box (-5.19735e-11 -7.56339e-18 -5.51343e-11) (0.001 0.001333 0.001)
    Mesh has 2 geometric (non-empty/wedge) directions (1 1 0)
    Mesh has 2 solution (non-empty) directions (1 1 0)
***Number of edges not aligned with or perpendicular to non-empty directions: 14980
  <<Writing 28261 points on non-aligned edges to set nonAlignedEdges
    Boundary openness (2.20986e-15 -2.97635e-15 6.02407e-17) OK.
    Max cell openness = 3.08974e-16 OK.
    Max aspect ratio = 20.3769 OK.
    Minimum face area = 1e-12. Maximum face area = 3.46597e-10.  Face area magnitudes OK.
    Min volume = 1.26582e-17. Max volume = 4.3873e-15.  Total volume = 1.333e-09.  Cell volumes OK.
    Mesh non-orthogonality Max: 0.00311489 average: 4.38178e-05
    Non-orthogonality check OK.
    Face pyramids OK.
    Max skewness = 0.000137648 OK.
    Coupled point location match (average 0) OK.

Failed 1 mesh checks.

End

在ICEM中，我是把两个block（fluid 和 solid）的交界面定义为一个part：interface，请问是我的交接面定义出错了吗？

[hongjiewang]

请问老师，我创建的一个库想从phaseChangeProperties中读取参数，但是当我算例分别创建了constant/FLUID和constant/SOLID后，我下面这样的定义是不是读不到了。我的求解器是基于chtFoam修改的~

    const IOdictionary dict
    (
        IOobject
        (
            "phaseChangeProperties",
            mesh.time().constant(),
            mesh,
            IOobject::MUST_READ,
            IOobject::NO_WRITE,
            false // Do not register
        )
    );

[李东岳]

@hongjiewang 你这个interface是有两个面么，类似interface1和interface2，还是一个无厚度的面

[hongjiewang]

@李东岳 老师，是一个无厚度的交界面，是HC这个界面。

[李东岳]

无厚度的面不应该是interface啊，interface是两个重叠的面，无厚度的面就是一个面。

[hongjiewang]

@李东岳 啊，老师，不好意思，我理解错无厚度了，以为是交界面是无厚度的意思~
我这里确实是两个重叠的面（红色那条线是我说的交界面），在ICEM里是不是应该把两个面定义成一个interface，再放到openfoam里。

[hongjiewang]

@李东岳 老师，网格问题已经解决了~还是出现上面的错误。看您上面提到i是否溢出，如果溢出的话，其他变量应该也会读取错误吧。请问我应该如何检查是否是溢出导致的错误~

[hongjiewang]

问题已解决~因为变量不能从字典中正确读取，修改读取语句后可以正常运行