ANSYS生成复杂网格,interFoam求解,程序时收敛时不收敛,求指点
-
大家好,
近期在做一个偏工程的项目,采用ANSYS Meshing生成网格,用OpenFOAM的interFoam求解。个人第一次用到相对复杂的几何模型,如图示。水流从左端进入,漫过溢流堰后从多排小管道进入下游区域。
采用粗糙网格生成的网格质量为0.3~1,max skewness0.85,程序跑起来能收敛。但当网格细化一倍后,网格质量为0.5~1,max skewness0.55,程序跑起来反而不收敛。尝试过多种网格的生成方式,在checkMesh OK的情况下,大部分条件下程序都在跑了一小段时间后无法收敛。希望各位师友有相关经验的能指点一下,有哪些可能的影响因素,先谢谢了!程序中用的standard k-epsilon model,
PIMPLE算法设置如下:PIMPLE { momentumPredictor no; nOuterCorrectors 1; nCorrectors 3; nNonOrthogonalCorrectors 0; }
在fluentMeshToFoam过程中,虽然所有网格面我都做了定义,仍然有如下信息:
Building patch-less mesh...--> FOAM Warning : From function Foam::polyMesh::polyMesh(const Foam::IOobject&, Foam::pointField&&, const cellShapeList&, const faceListList&, const wordList&, const wordList&, const Foam::word&, const Foam::word&, const wordList&, bool) in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 595 Found 60358 undefined faces in mesh; adding to default patch. done.
不知是否有影响。